Many flat-screen TVs come with moderate internal speakers. However, for that extra oomph, people usually go for a soundbar with their TV.
If you’re someone who also just bought a soundbar and is confused about how to mount it under your TV, we’ve got you covered.
Read this guide carefully, we have added all the relevant information, instructions, tips, and FAQs to help make the installation process quick and easy for you.
Quick summary
This guide includes all the necessary information about:
- How you can mount your soundbar?
- Tools you need to do it yourself.
- A detailed FAQs section.
How to Successfully Mount Your Soundbar Under Your TV - Step-by-step Instructions Guide
Before we start, you have to make sure you have all tools you need. It is necessary to be fully prepared for the process to ensure your project runs smoothly.
We understand that you might need help with the installation process so we have done all the necessary research for you.
Tools You Need Before You Mount Your Soundbar Under Your TV
You can use the tool kit you got for the installation process of your TV mount but go through this list in case there are some additional tools you might need.
- Soundbar: There is a variety of soundbars so choose which you like.
- Soundbar Mount Bracket: This is necessary for keeping your soundbar secure.
- Screws: You can use the screws you already have but you might need some additional screws as well.
- Spacers: Helps have a proper finish to the drill bit holes.
- Measuring tape: It helps measure the dimensions.
- Pencil: It helps in marking the spots or pilot holes.
- Philip Screw Driver: It helps tighten the screws and spacers.
- Plumber’s Tape: This might help keep in place all the wires.
- Double-Sided Tape: It might come in handy for some wires and power bricks.
Step-by-step Instruction Guide on How to Mount Your Soundbar Under Your TV
This section is the most important part of this guide as it has all the necessary steps you need to follow to successfully mount your soundbar.
After thorough research, we have capitulated these steps for this guide to assist you along the process.
Let’s start with it.
Step 1: Remove Your TV from the Wall
After you remove your TV from the wall, keep it on a flat and soft surface, and then remove the feet entirely.
Tip: Screw back the screws that are removed from the TV’s feet to keep them safe, in case you resell the TV.
Step 2: Check the Screws
Use the screws in the tool kit and find the compatible ones by screwing all the way in to check if you need spacers or not.
Note: The combination of screws and spacers might differ depending on the TV model.
Step 3: Adjust the Soundbar
Put the soundbar on the desired height under your TV and line it up in the center.
Tip: Center your soundbar according to the screws at the back of your TV, this way it will fit very nicely.
Step 4: Adjust Soundbar Bracket
Check the screws at the back of the TV and adjust your soundbar bracket in the center of the TV’s back.
Step 5: Use the Screws
Fit in the screws in the holes of your soundbar bracket. Some soundbars might require you to tighten them with a screwdriver but some might only need to be slid up.
Tip: Sliding in the screws locks them up in a fixed position.
Step 6: Adjust the Soundbar Bracket and Wires
Adjust everything according to the height and position you like and then tighten the screws firmly.
Cut the plumber’s tape after you measure the space between both the brackets.
Secure the tape after you tighten it. Put the screws in the bigger holes.
Tip: Plumber’s tape is a better alternative than velcro pads to keep the wire in place.
Step 7: Plugin All the Wires
After you put everything in place, plug in all the wires in designated slots. Also, use double-sided tape to secure the power brick in one place at the back of your TV.
Step 8: Do the Final Finishing
Adjust and plug in the fiber optic wire very carefully.
Use a couple of zip ties to secure all the wires and to keep them intact.
Moreover, mount your TV back to the wall on your wall mount. You are done once you do all these steps.
Tip: Make sure you do not bend the fiber optic wire as it damage or disrupts the audio.
Frequently Asked Questions (FAQs)
We have also added this detailed FAQs section to help you with any confusion you might have left.
Can you mount a soundbar under your TV?
Yes, you can mount your soundbar under your TV. Just use the compatible screws and adjust it to the height and position you prefer.
How close you can put the soundbar to your TV?
There must be at least a 4 to 6 inches gap between your TV and soundbar. The measurement in cm is about 10 to 15 cm between TV and soundbar.
This will keep your soundbar secure and the audio clear.
How high can you mount the soundbar?
The preferred height should be 7.5 to 12 feet tall. Make sure you mount your soundbar under the TV or in front of the TV for clear audio. Keep the sound path clear.
Where is the best place to keep your soundbar?
The ideal location is to mount your soundbar under your TV as it saves space and also keeps the audio clear. You can also adjust the wire neatly.
To Conclude…
Now that we have reached the end of this article, we hope this article helped you with everything you wanted to know.
If you choose to mount your soundbar under your TV yourself, then this guide will help you do the job smoothly.
We have added all the necessary information such as instructions, tips, FAQs, and more to make it very easy for you.
For any further queries, feel free to contact us.
Adam F.
A/V and Home Theater Expert that focuses on providing clear as well as concise reviews for anything and everything Audio Visual. From TV's, TV Mounts, Soundbars, and Wiring, my focus is to provide expertise in everything Audio Visual focused.
