A tilt TV wall mount will always help you make your viewing angle more comfortable.
The tilt feature will remove all the glares and give you crystal clear picture quality.
Stick around and learn how to install a tilt TV wall mount in easy steps added with a list of frequently asked questions.
Quick Summary
The following information will be discussed in the article:
- How to install a tilt TV wall mount?
- Benefits of a tilt TV mount
How to Install a Tilt TV Wall Mount?
Before you start the installation process make sure to read the instruction manual and have the following list of materials available.
- Electric drill
- Philips head screwdriver
- Tape measure
- Level
- Pencil
- Drill bit
- Stud finder
- A hammer (if you plan to install it on a concrete wall)
Once you have the materials ready you can start the installation. The following are the steps that you have to follow:
Step 1
Source: Reddit
For the first step, attach the TV brackets to the TV. First, align the TV bracket to the holes in the back of the TV and then use the appropriate screw to fit the bracket. Use the Philips head screwdriver to tighten these screws.
Make sure to not overtight the screws as it can damage the TV.
Step 2
Source: Reddit
For the second step, you have to attach the wall plate to the wall. It is advisable that the center of the screen should be at your eye level. This is usually 42 inches from the floor but can vary from preference to preference.
Step 3
Source: Reddit
Once you have made the decision of your TV’s height, you now have to find the studs in the wall. Use a stud finder to locate the studs.
Wall studs are usually 16 or 24 inches apart. Once the studs are located, use a pencil to mark them.
You have to skip the above mention step if you plan to install the tilt mount on a concrete wall.
Step 4
Then use a drill to make pilot holes where you marked the studs. Then align the wall plate openings with the holes in the wall and use lag bolts to secure the wall plate. Then use a wrench to tighten these bolts.
Step 5
Lastly, attach the TV to the wall plate. You may need a friend for this step depending on the size and weight of your TV. Once the TV is hanging on the mount lock it into place tightly.
Refer to your instructions guide for minor details.
Your TV is successfully mounted. You can tilt it up or down to get the best viewing angle. In addition to this, you can level it even after installation due to its tilt feature.
Benefits of a Tilt TV Mount
Reduced Eye and Neck Strain
If you feel a strain in your eyes and neck after watching the TV for some time, it can be due to the fact that your TV is mounted too high.
However, if you have a tilt TV mount, you can adjust the TV by tilting it downwards. This will help ease the discomfort you were facing before.
Reduced Glare
A tilted TV mount allows you to tilt the TV as many times as you want. If you have sunlight coming into your room, you can tilt your TV as necessary seeing the sunlight change throughout the day. This will reduce the glare
The Flexibility of Mounting Location
If you have installed the TV above a fireplace or some other awkward space in your room such as a corner, the tilt feature of the mount will at least give you more flexibility. The tilt TV mount will allow you to tilt the TV to the desired position where the viewing angle is acceptable.
Space Available to Hide Wires and Cables
TV on a tilt mount has some gap between the wall and the mount, you can easily utilize this space to hide wires and cables.
Since with time these cables and other TV-related devices are decreasing in size, these mounts will help more to camouflage them.
Frequently Asked Questions (FAQs)
How Does a Tilt Wall Mount Work?
A tilt wall mount allows you to tilt your TV screen a few degrees forward or backward. This reduces the annoying glare and reflections on the screen to give you a better viewing experience.
Why does a TV Mount Tilt Forward?
If your TV is tilted to the forward when mounted, the issue could be with the screws that secure the TV. The screws should be tightened and it should be made sure that they are snug.
What does a low-profile TV mount mean?
A low-profile or also known as a fixed TV mount is the most common type of mount to attach a TV on. Low profile means it is very close to the wall, which prevents it from sticking out. These types of mounts are static, which means they do tilt in any way.
Do TV Mounts Move Up and Down?
Many types of TV mounts can articulate. They can pivot up and down. This wall flexibility to your TVs because you can now angle the TV into any direction you want and avoid glare on a sunny day.
How do you Remove a TV from a Tilt TV Mount?
To remove a TV from a tilt TV mount, you have to first unplug all of the wires. Then tilt the bottom part of the TV and then lift it very gently. Then remove the TV from the wall mount.
Use a screwdriver to unscrew the mount bracket from the TV. Lastly, use a screwdriver to remove the wall mount from the wall.
Wrapping Things Up
We hope that you have learned the easiest and the most simple way of how to install a tilt TV mount.
In addition to this, you have also learned in detail the benefits a tilt TV mount provides with a list of frequently asked questions.
Read the article carefully as it will help you in your installation process and avoid chances of any damage.
Let us know if you have any other questions or concerns.
Adam F.
A/V and Home Theater Expert that focuses on providing clear as well as concise reviews for anything and everything Audio Visual. From TV's, TV Mounts, Soundbars, and Wiring, my focus is to provide expertise in everything Audio Visual focused.
