A full-motion TV wall mount has multiple pivot points which allow you to tilt, swivel, rotate, and extend your TV.
This TV mount when extended gives a floating TV effect and works best in corners as well.
The following guide will explain how to install a full-motion TV wall mount in simple steps keeping in mind the motion.
Quick Summary
The following information will be discussed in the article:
- How to install a full-motion TV wall mount?
- What are the different types of TV wall mounts?
How to Install a Full Motion TV Wall Mount?
To begin, there are some tools that you need for this installation. The following is the list:
- Level
- Pencil
- T Square
- Drill
- 0.25 inches drill bit
- Stud finder
- Measuring tape
- Metric socket set
- Philips screwdriver
Once you have the tools ready, you can start with your installation.
Step 1
First, you need to find the ideal location and height for your TV. This depends on the distance from the TV to your viewing area. Usually, a TV is placed at a height of 42 inches. This is from the floor to the center of the TV.
Step 2
Source: Reddit
For this step, use a stud finder to find the center of a wooden stud. Mark the center using a pencil. You need to mark the desired height at which the TV will be installed on the same stud as well.
Step 3
Then align the middle hole on the backplate of your full motion tv wall mount with the pencil mark that represents the desired height of the TV. Then mark the three pilot holes using a pencil too.
Step 4
Pre-drill all of the mounting holes using a 3mm drill bit. You need to make sure that drilled holes are vertical.
If these are not vertical you can miss the wooden stud.
Step 5
Source: Reddit
Next, place the full motion TV mount against the wall and thread the first screw by hand. Ensure that the mount is level during this. Then do the same with the other three screws, first by hand and then tighten with a 14mm socket.
Step 6
Source: Reddit
Lastly, attach the TV to the mount. You will need a friend or partner for this step. Once the TV is attached, secure it tightly.
Your TV is now mounted.
This full-motion TV can now be tilted, extended, or rotated in any direction to give you the best viewing experience and avoid any glare.
What are the Different Types of TV Wall Mounts?
You might feel overwhelmed by the different types of TV wall mounts available in the market. It is important to know the difference between these types so you can buy one according to your needs. The following are the different types of wall mounts:
Fixed Wall Mount
Fixed wall mounts are usually the cheapest and simplest to install. You just have to screw the bracket on the wall and then hang the TV onto the bracket. The installation of a fixed wall mount is clean and tidy. This works best if you have an ultra-thin TV.
Why is a fixed mount preferred for large-size TVs?
A fixed wall mount is used in cases where the TV is to be mounted on a stud wall. This is done to ensure that the weight of the TV and bracket is evenly distributed, and directed through the wall. Other types of mounts are unable to hold the weight of large TVs and the bracket can tear off.
For similar reasons, a fixed wall mount is ideal for TVs that have more weight and are larger as other brackets struggle with the weight.
Swivel Wall Mount
A swivel wall mount allows you the movement of the TV to a certain degree. Mostly swivel wall mounts either swivel left and right or tilt up and down.
What are the benefits of wall mounts that swivel left and right?
These types of TV mounts are extremely useful in wide rooms, where people have to view the TV from awkward angles. This type of wall mount swivels left and right to help view the picture head-on, this is extremely beneficial for LCDs that have narrow optimal viewing angles.
What are the benefits of wall mounts that tilt up and down?
Wall mounts that tilt up and down are most beneficial when the TV is mounted high. For example, a TV mounted high can be tilted downwards to get the best viewing angle. These tilting mounts give you viewing angles that cause no neck strain and are comfortable.
Full Motion Wall Mount
These are the most advanced compared to the other two. A full motion wall mount not only offers up and down, right and left movement, but can also be extended from the wall.
These movements make sure that you get a lot of flexibility and viewing options for yourself. When the TV is not in use, you can easily store it against the wall.
What to keep in mind when you plan to install a full-motion TV mount?
If you plan to install a full-motion TV mount, you need to research and make sure that the bracket can handle the weight of the TV. You also need to make sure that it is securely fixed to the wall.
For these reasons, it is never recommended to use a full-motion TV mount for a TV that is large in size or is heavy in weight. In addition to this, full-motion TV mounts should also not be used on a stud wall.
Wrapping Things Up
We hope that you have learned the most trouble-free way of installing a full-motion TV wall mount. This will save you a lot of time and give you the best results.
In addition to this, you have also learned about the different types of wall mounts and their benefits. We recommend that you read this article carefully before you buy a wall mount.
With that, we conclude our article.
Let us know if you have any questions or queries in the comments below.
Adam F.
A/V and Home Theater Expert that focuses on providing clear as well as concise reviews for anything and everything Audio Visual. From TV's, TV Mounts, Soundbars, and Wiring, my focus is to provide expertise in everything Audio Visual focused.
